Loading...
Serving Sunrise, FL and surrounding areas. (754) 294-7370
Sunrise Florida Epoxy is a concrete flooring contractor serving Margate, FL, with concrete resurfacing, epoxy coatings, garage floor systems, and polished concrete for homes throughout Broward County. We have served this area since 2016 and respond to all estimate requests within one business day.
Driveways, patios, and pool decks on Margate homes from the 1960s through 1980s have absorbed decades of Broward County rain, UV exposure, and hurricane-season moisture. Surface cracking and spalling on slabs that age is normal, and full replacement is rarely necessary. Concrete resurfacing applies a bonded overlay that corrects the surface damage and seals the slab against further deterioration at a fraction of the cost of a new pour.
Most Margate single-family ranch homes have attached garages with bare concrete floors that have spent years absorbing oil, moisture, and South Florida heat. A coated garage floor is easier to clean, resists the humidity and chemical staining common in Broward County garages, and holds up through the temperature swings that come with the region's climate.
Many Margate homes have interior utility rooms, laundry areas, and Florida rooms sitting on uncoated concrete slabs. Epoxy applied over mechanically prepared concrete seals those surfaces against the moisture that works its way through slabs in this part of Broward County during the wet season, and gives homeowners a durable, cleanable floor surface.
Canal-adjacent lots are common in Margate, and many of those properties have pool decks that deal with high moisture from both sides - pool water and the surrounding groundwater. Aging pool decks with rough, cracked surfaces are a safety issue on top of a cosmetic one. Resurfacing or coating those decks restores a smooth, slip-resistant finish before the deterioration goes further.
Margate's flat terrain and canal network keep the water table close to the surface in many residential neighborhoods, and uncoated driveways, walkways, and patios absorb that moisture steadily. Sealing these surfaces after grinding prevents the water intrusion that causes early spalling and cracking, and it extends the life of concrete that is already decades old.
The solid slab foundations in Margate's 1960s and 1970s homes are often good candidates for polishing and sealing into a finished interior surface. Polished concrete stays cooler underfoot than carpet in Margate's heat, does not trap allergens or mold spores the way fabric flooring does, and holds up against the humidity without absorbing it.
Margate is a city of about 60,000 residents covering roughly 9 square miles in western Broward County, and the housing stock here is almost entirely built out from the 1960s through the 1980s. Single-story Florida ranch homes on small to mid-sized lots dominate the neighborhoods, and most of those homes are concrete block construction with stucco exteriors and slab-on-grade foundations. At 40 to 60 years old, the driveways, patios, garage floors, and pool decks on those homes have absorbed a significant amount of South Florida weather. Concrete of that age that has never been sealed or coated is typically porous and surface-damaged, which means any coating work needs mechanical preparation to produce results that last more than a season in this climate.
The city's flat terrain and canal network are defining features of Margate's landscape. Many residential properties back up directly to drainage canals, which keeps soil moisture levels high near slabs and driveways in those neighborhoods. The Atlantic hurricane season adds another annual variable: wind-driven rain, storm surge from strong systems, and even the heavy rainfall from nearby storms can expose every weak point in unsealed exterior concrete. Contractors who work in Margate understand that prep quality and product selection for this specific moisture environment are what separate durable concrete work from work that needs to be redone.
Our crew works throughout Margate regularly, and we understand the local conditions that affect concrete flooring work here. The single-story CBS ranch homes throughout Margate's residential streets are the same construction type we work on across central and northern Broward County every week. We know how those slabs behave under grinding and coating, and we understand the moisture considerations that come with canal-adjacent lots.
The Margate City Center area along Margate Boulevard is the civic hub of the city, home to City Hall and the community library. Calypso Cove waterpark at the Margate Sports Complex is one of the most recognized destinations in the city and is a landmark most long-time Margate residents know well. The Oriole neighborhood is one of Margate's established residential communities, centered around the Oriole Golf and Tennis Club, and we have worked on homes throughout that area and across the surrounding streets. For building permits and inspections related to concrete or exterior work, the City of Margate building department handles the municipality.
Margate shares its southern boundary with North Lauderdale, where we work on the same vintage of CBS homes and encounter identical concrete conditions. We also serve homeowners in Coral Springs to the west, where the housing stock is slightly newer but the South Florida moisture and UV issues that affect concrete are the same across the region.
Call us at (754) 294-7370 or submit your project details through our contact form. We respond to all Margate inquiries within one business day and can usually arrange a site visit within the following few days.
We visit your Margate property to measure the area, assess the slab for cracks, moisture, and surface condition, and determine what preparation the concrete needs before any coating or overlay goes down. You receive a written estimate with itemized scope, specific products, and clear pricing before any commitment is made.
We grind the slab with diamond tooling to open the concrete surface and remove contamination, fill any cracks or voids, and then apply the coating or overlay system. Most Margate residential jobs finish in one to two days from start to completion. You do not need to be on-site during the work, but we coordinate access with you before we begin.
Once the coating has cured, we walk through the finished work with you and cover care instructions for the specific system installed, including return-to-use timing, cleaning recommendations, and products to avoid. You leave with written notes and our contact information for any follow-up questions.
We serve Margate and all of Broward County. Submit your project details or call us directly - we will get back to you within one business day.
(754) 294-7370Margate is a city of about 60,000 residents covering roughly 9 square miles in Broward County, situated about 5 miles west of the Atlantic coast in the flat inland grid that characterizes western Broward. The city was incorporated in 1955 and grew rapidly through the 1960s, 1970s, and 1980s as South Florida's postwar suburbs pushed westward. Most of Margate is now fully built out, with very little undeveloped land remaining. The dominant housing type is the single-story Florida ranch on a small to medium lot, and canals run through many of the city's residential neighborhoods - a common feature across this part of Broward County.
Long-time residents know the city by its neighborhoods and landmarks. The Oriole area near the Oriole Golf and Tennis Club is one of Margate's most established residential communities. Calypso Cove at the Margate Sports Complex is the city's well-known public waterpark and a gathering point for families throughout the area. Sample Road and Coconut Creek Parkway are the main east-west corridors most residents travel daily. Margate borders Coral Springs to the west and North Lauderdale to the south, both of which have housing stocks with the same age and construction characteristics that drive concrete flooring demand across the area.
Durable, high-gloss epoxy coatings that protect and beautify any concrete floor.
Learn MoreHeavy-duty epoxy systems built to withstand demanding commercial and industrial environments.
Learn MoreTransform your garage floor with tough, easy-to-clean epoxy coatings.
Learn MoreFast-curing polyaspartic coatings that deliver lasting protection in one day.
Learn MoreStunning metallic epoxy floors that create a unique, high-end visual effect.
Learn MoreChemical-resistant urethane cement floors ideal for wet and high-traffic areas.
Learn MoreElegant polished concrete floors that are low-maintenance and long-lasting.
Learn MoreDecorative stained concrete adds rich color and character to any surface.
Learn MoreMoisture-resistant basement flooring solutions that improve safety and aesthetics.
Learn MoreExpert surface preparation ensures every coating bonds properly and lasts longer.
Learn MoreProtective concrete sealing guards surfaces against stains, moisture, and wear.
Learn MoreResurface damaged concrete to restore a smooth, fresh-looking floor affordably.
Learn MoreSelf-leveling overlays create a perfectly flat, seamless surface for any coating.
Learn MoreSlip-resistant pool deck coatings that stay cool and look great year-round.
Learn MoreComplete stripping and removal of old coatings to prepare for a fresh start.
Learn MoreWe cover Margate and the surrounding Broward County communities. Call today or send us your project details and we will be in touch within one business day.