
Sunrise Florida Epoxy handles epoxy coatings, polished concrete, garage floors, pool decks, and commercial flooring for homeowners and businesses across Broward County. Licensed, insured, and based right here in Sunrise.

Sunrise Florida Epoxy is a licensed concrete flooring contractor serving Sunrise, FL and the surrounding communities of Plantation, Fort Lauderdale, and Coral Springs. We offer 16 flooring services - from epoxy and polyaspartic coatings to polished concrete, terrazzo restoration, and pool deck resurfacing - covering 12 cities across Broward County. Whether your floor is stained and crumbling or just ready for an upgrade, we handle the prep, the coating, and the cleanup.

Stained or pitting garage floor? Epoxy bonds directly to concrete and seals out oil, moisture, and tire marks for years.
Learn More
Worn warehouse or shop floor? Commercial epoxy creates a seamless, chemical-resistant surface that handles heavy traffic and forklifts.
Learn More
Tired of scrubbing oil stains off bare concrete? A garage floor coating transforms the space and keeps it clean with a quick mop.
Learn More
Need your garage back fast? Polyaspartic coatings cure in hours, not days, and hold up in Florida heat without leaving tire marks.
Learn More
Want a floor that looks like polished stone? Metallic epoxy creates a one-of-a-kind swirled finish that doubles as a conversation piece.
Learn More
Commercial kitchen or processing area? Urethane cement handles thermal shock, chemical exposure, and heavy-duty cleaning with ease.
Learn More
Dull gray slab? Polished concrete brings out the natural beauty of the floor and delivers a low-maintenance surface that lasts decades.
Learn More
Looking to add color without tile? Concrete staining penetrates the slab to create rich, permanent tones that will not peel or chip.
Learn More
Restore or install terrazzo for a timeless look - chip-free, easy to maintain, and built to last in Florida homes and businesses.
Learn More
Damp or unfinished basement floor? We coat and seal concrete to handle moisture and create a surface you can actually use.
Learn More
Proper prep is what makes a coating last. We grind and profile your slab so every coating system bonds the way it should.
Learn More
Bare concrete absorbs everything - oil, water, and salt. Sealing creates an invisible barrier that protects the slab from the inside out.
Learn More
Cracked or worn surface but the slab is still sound? Resurfacing adds a fresh layer that covers damage and extends the life of the floor.
Learn More
Uneven or sloped floor causing problems? Self-leveling overlays correct the grade and create a perfectly flat surface for any finish.
Learn More
Faded or rough pool deck? We coat and resurface outdoor concrete to make it safe, slip-resistant, and cool underfoot in the Florida sun.
Learn More
Old coating peeling or failing? We strip it back to bare concrete so the next system has a clean, properly prepared surface to bond to.
Learn MoreReach out by phone or the contact form on this site. We respond within 1 business day. You tell us about your space - the size, what it looks like now, and what you are hoping to get out of the project. No commitment required at this stage.
We come to your property, inspect the concrete, and test for moisture - a step that is especially important in Sunrise where the water table is high. You get a written quote that covers prep work, coating options, and the total cost. No surprises when the invoice arrives.
Our crew handles everything from surface grinding and crack repair to the final topcoat. Before we leave, we walk the finished floor with you so you can inspect the work, ask questions, and get care instructions in writing. The job is not done until you are satisfied with what you see.
We hold a valid Florida contractor license through the Department of Business and Professional Regulation and carry full liability insurance. You have legal protection and real recourse if anything goes wrong.
We inspect your concrete in person before quoting - no phone estimates, no vague ranges. The price we give you after the visit is the price on the invoice. We cover all 12 cities in our service area at no travel charge.
We have been working in Broward County since 2016 and know exactly how South Florida humidity, salt air, and slab construction affect concrete floors. We bring that local knowledge to every job.
Every installation comes with a written warranty covering defects in materials and workmanship. We do a final walkthrough before the crew leaves so you can flag anything that does not look right while we are still there.
Ready to talk through your project? Call (754) 294-7370 or send us a message.
"They came out for the estimate within two days, gave me a written price on the spot, and showed up exactly when they said they would. The garage floor looks completely different - no more oil stains soaking in, and cleaning it now takes about two minutes. Exactly what I wanted."
Marcus T., Plantation, FL - Garage Floor Coatings
"We had a 4,000 square foot warehouse floor that had been failing for two years. They tested for moisture before starting - something the last contractor never did - and that made all the difference. The floor held up through two rainy seasons without a single bubble or peel."
Denise R., Fort Lauderdale, FL - Commercial Epoxy Floor Coatings
"Our pool deck was rough and faded after years in the Florida sun. They resurfaced it in one day and the texture makes a real difference - it is no longer slippery when wet. My kids notice. I would recommend them to anyone in Coral Springs looking for pool deck work."
Angela V., Coral Springs, FL - Pool Deck Coatings and Resurfacing
We respond within 1 business day, and there is no obligation to move forward. After you submit the form, someone from our office will call to schedule a free on-site estimate at a time that works for you.
(754) 294-7370Sunrise Florida Epoxy is based in Sunrise, FL and serves 12 communities across Broward County, including Plantation, Fort Lauderdale, Coral Springs, and Pompano Beach. We cover each city in our service area with no travel surcharge, and we can typically schedule an on-site estimate within the same week you contact us.
Peeling almost always traces back to moisture in the slab that was not tested before the coating went down. In Sunrise, Broward County slabs sit close to a high water table, so moisture moving up through the concrete is the most common cause of premature coating failure - and the easiest problem to prevent with a simple test. The American Concrete Institute covers moisture testing standards for floor coatings.
Sealed and polished concrete outperforms tile in South Florida because it has no grout lines to trap moisture and mold, and it handles temperature swings without cracking at the joints. Tile looks clean when new but grout deteriorates fast in high-humidity environments, and replacement is expensive when individual tiles crack.
Proper prep means grinding the entire floor with mechanical equipment, filling cracks and divots, and testing for moisture before a single drop of coating goes down. It is loud, dusty, and takes most of the first day - which is exactly how long it should take. A contractor who finishes the whole job in one afternoon skipped the prep.
Surface cracks, pitting, and staining are all repairable before coating. What cannot be coated over is a structurally compromised slab - one with deep heaving, significant settlement, or active water intrusion from below. A contractor should assess the slab in person before quoting, because what looks like cosmetic damage sometimes points to a deeper problem.
Both are far more durable than paint, but polyaspartic wins on cure speed and UV resistance - it will not yellow in sun-facing garages the way standard epoxy can over time. Epoxy is generally less expensive and still very durable for interior, low-sun spaces. The right answer depends on your garage orientation, budget, and how quickly you need the space back.
The clearest sign is whether you can see and hear grinding happening before any product goes down. Good contractors also show you the moisture test results - a simple number you can look at and ask about. If a crew arrives and moves straight to pouring coating without visible grinding and at least a moisture check, the job is almost certainly going to fail early.
Sunrise Florida Epoxy is a licensed and insured concrete flooring contractor based in Sunrise, FL, serving 12 communities across Broward County since 2016. Our license is issued through the Florida Department of Business and Professional Regulation, which requires passing a state exam, carrying active insurance, and maintaining accountability for every job performed.
Since 2016, we have completed flooring projects across 16 service categories - from garage epoxy and commercial coatings to terrazzo restoration and pool deck resurfacing - for homeowners and businesses throughout western and central Broward County.
Want to know more about how we work and what to expect from the process? Read about our company.
Most concrete slabs - even older ones with surface cracks and staining - are good candidates once properly prepared. The exception is a slab with active heaving, significant structural cracking, or ongoing water intrusion from below. Those issues need to be addressed before any coating goes down, or the coating will fail quickly. A contractor who assesses your slab in person can tell you within minutes which category you are in. The Epoxy Technology resources offer a useful overview of surface conditions and coating compatibility.
If your current coating is mostly intact but dull, faded, or scratched, a resurfacing overlay can be applied over the existing surface - saving time and cost. If the coating is peeling, bubbling, or has significant adhesion failures, stripping back to bare concrete and starting fresh is the better long-term investment. Patching over a failing coating almost never works; the new material has nowhere solid to bond.
The maintenance is genuinely simple: sweep regularly, mop with a mild pH-neutral cleaner, and clean up spills - especially oil, fuel, and harsh chemicals - before they sit. Avoid dragging heavy metal objects across the surface. If the floor takes heavy vehicle traffic, a topcoat refresh every 5 to 7 years extends the life of the system significantly. A coated floor is always easier to maintain than bare concrete.
Still not sure which service fits your floor? Call (754) 294-7370 and we will walk you through the options based on what you are actually working with.
Sunrise is a city of roughly 100,000 residents in western Broward County, sitting between Fort Lauderdale and the edge of the Everglades. Most of the housing stock was built between the 1970s and 1990s - concrete block ranch homes on slab foundations, which means the garage floor, lanai, and interior floors are all poured concrete sitting directly on sandy soil with a high water table. That combination makes moisture management more important here than in almost any other region of the country.
The city is home to Sawgrass Mills, one of the largest outlet malls in the United States, and Amerant Bank Arena, where the Florida Panthers play - landmarks that most Broward residents use as reference points when describing where they live. We have worked on homes and businesses throughout Sunrise, from the neighborhoods near Markham Park to the communities along Sunrise Boulevard and the western corridors near the Everglades edge.
The combination of slab-on-grade construction, year-round humidity, and proximity to the coast means floors in Sunrise take more environmental stress than floors in drier, inland cities. Salt air from the Atlantic - roughly 10 miles east - accelerates corrosion on unprotected concrete, and the flat terrain means drainage issues and standing water after storms are common in many neighborhoods. We bring local knowledge of these conditions to every estimate and every installation - which is why our coatings hold up through Broward County rainy seasons when others peel.
By appointment only, no walk-ins.
Sunrise Florida Epoxy
8901-8933 W Oakland Park Blvd, Suite 8925
Sunrise, FL 33351
quotes@sunrisefloridaepoxy.com
MON - FRI: 8:00 AM - 7:00 PM, SAT: 8:00 AM - 5:00 PM, SUN: Closed
Contact Sunrise Florida Epoxy today for a free on-site estimate - no obligation, and we respond within 1 business day.